Garden & Power Tools

Just the worst customer service. I asked a simple support question and seven days later I am still awaiting a response. I have sent follow… Read more

reminders, engaged with the chatbot and emailed direct but Hoselink is clearly not interested in engaging with customers or providing any support. Steer clear of this product.

A good reliable pump that needs no maintenance. This is our second one after getting many years from the first. Supplied at a reasonable price too - far less than one plumber wanted to install a different brand. Show details

Quick service friendly confident he was helpful and professional. We would go there again.

Not using it yet, just bought it as backup incase we get a cyclone this year and loose power. Show details

Pump works great. Easy to reset once tank was empty. Would recommemd. Show details

Great unit. Only just been installed. But it heated our 26000L pool in just 2 days. Also very quiet. Show details

Great product. Really quiet and simple to set up using the touch screen display or the App. I definitely recommend this product. Show details

It I great – Is a great welder for decent size jobs and great on gas Show details

Everything was just so easy from ordering payment and delivery Show details

I have used these machines for several years now most days and sometimes flat out all day. Personally have not seen one fail. I had to hunt high and… Read more

low across Australia to find a remaining one of these superseded models. Absolutely amazing little welder for the price! I would not have the new model for no other reason than the very loud fan that runs full noise for at least 5 full minutes every time it strikes an arc irrelevant of temperature. Very annoying in a quiet workplace like a home workshop. I actually bought the new model and returned it in disgust, It totally contradicts the advertised “smart fan” feature that Unimig advertises with the new model. What a shame. If you can find the KUM-M-RTIG200ACDC buy it and dont sell it! I Awesome welders so much better than the new model in my opinion.

Excellent service quick response, good quality pumps, highly recommended thank you

I'm really happy with the results. The plants look healthier, the leaves are greener, and I've noticed plenty of fresh new growth. It's very easy to… Read more

apply, and I like that it provides a steady, slow-release feed without any fuss. It has become part of my regular plant care routine because it keeps my houseplants looking their best.

This is a great small axe with an orange handle. Great for smaller jobs eg I garden a lot so this has been a wonderful addition to the tool kit. It’s… Read more

not heavy - I’m a female and can’t lift much normally so think this would be fine to use universally. Found it to be really helpful and it also feels like good quality sturdy wood. I have been provided this product and asked to give my honest opinion.

I have been using this wire for a while now, it leaves alot cleaner finish than other brands and runs alot nicer through my welders., Show details

great welder – Purchased this unit as a work item needed for welding RSJ and fence posts. It totally out performed my old welder and lays great welds using fluxcore wire. Great price, great unit, thoroughly recommend this product. Show details

After a few uses, the nozzle will not turn at all; consequently, you cannot control the water speed. The cord is frayed after a few uses, and I keep… Read more

it in the container it was purchased in, so I am not sure how it can fray in such a short time. After calling customer service, I was advised it was not their problem.

Great pump has been supplying a house for over a year and a half now. I love the fact that you can connect a generator to it as well for those long… Read more

cloudy periods. The pump is made really good quality part and it’s perfect for our residential situation.

Veggie pod customer service is absolutely zilch. My whole community garden uses veggie pods and we wanted to order some connectors after the original… Read more

ones got brittle and broke in the sun. Veggiepod have an eBay store and I put in an order which after 6 weeks was never shipped. I contacted veggie pod three times to try and get clarification on my order with absolutely no response. I had to get eBay to step in to refund me. The listing is still live for other eopel to have the same frustrating experience. I've tried to phone but they don't answer my calls. There are other products on the market, next time I'll choose one with better customer service and values.

So far so good using less paint was the aim certainly is way easy to operate. Adjustment on gun easy to use am just getting acquainted with all aspects of what it can do hopefully a bright future together Show details

This log splitter is easy to grip and use. It wasn't overly heavy and was excellent and splitting logs. It has made my life so much easier. It is… Read more

easy to handle and has a smooth grip. It is a great addition to my tools

I have been provided this product and asked to give my honest opinion.

Where to start? Bulk and heavy compared to other products. Filters are very fiddly to replace. The foam rollers get hyper-dried out, turning them… Read more

into flotation devices. Before the machine will sink and do its job, you need to spend quite a while first "massaging" the rollers to get them to start soaking up water. Both drive belts snapped. The cord twists around itself in normal operation *very* quickly, and is very difficult to straighten out (hint - for goodness sake, buy a cordless model of whatever brand you get). The constantly twisted cord reduces the robot's operational range and at times threatens to pull the controller into the water. The connector housing where the cord goes into the body of the controller became loose very quickly, and with all the cord twisting, it eventually severed the electric wires completely, thus rendering the machine unusable. The carrier supplied by Robotek began rusting almost immediately. The climb function can't deal with curved steps, and would often get hung up at an awkward angle. The mapping function is poor, with the machine focussing on one half of the pool and largely ignoring the other half. The device can't handle leaves from palm trees and struggled with slightly larger leaves such as those from some magnolia trees nearby. At the end of the day, any labour time the device saves you is cancelled out by the the effort of managing this device and the fact I had to finish the job properly with the traditional pool vacuum/brush. Positives: the filter bags, though painful to install, picked up fine dirt and sand well, and are machine washable.

I know my mig is no longer available but it is still going strong. I am using it in an all steel extension of my mancave. Working up at 3 meter heights is no problem. Love my unimig. Show details

The wifi receiver is a cheap unit and requires the unit to be within 1m of the wifi access point, which even when it is does not connect. When it randomly does connect the robot does not work. Not worth the money, do not waste your money. Show details

I've maintained 2 chlorine pools, 2 salt water pools and an Enviroswim. The Enviroswim isn't zero maintenance but it has been the easiest to… Read more

maintain. I've spent insignificant amount of chemicals compared to salt and chlorine pools. Even if it were the HARDEST and most expensive to maintain, I'd still buy it, because it's fresh water. I've drunk it. I'm about to install Enviroswim in another pool.

My favourite thing about it is the reactions from friends. To them it's like magic.

Absolutely incredible pump. Whisper silent, takes a 1/3rd of the electricity of other brands, nothing to rust out in the elements and enough pressure… Read more

crack your shower head wide open. Has solved all our problems. We now have another 22,000 litres of water on demand.

Lightweight compared to other mowers I've used. No bending over to start, no choke or fuel to mess with, just pull the cord from a standing position… Read more

and it goes. Starts first time regardless if hot or cold. The plug in hose deck wash feature is a nice touch. Fairly quiet and fuel efficient. I have 1500sqm sloping block which the mower handles with ease. Highly recommend!

Maintains a 1500sqm yard with ease. Smashes the weeds, plenty of power and much quieter than the two strokes I have used. Starts first time, ergonomic to use, awesome bit of kit. Show details

As a rookie welder this machine helps. Small,lightweight and packs a punch. Easy to use on fences and gates. Show details

I purchased the 180 amp inverter welder as an upgrade and replacement for my old (1985) 140 amp AC stick welder. The new welder has a better duty… Read more

cycle and it is much easier to strike an arc and it produces very smooth welds with less spatter than the old welder. The control panel allows for fine and accurate control of the welding amperage. The machine is light weight and easy to carry and the power and welding leads are a decent length (3m and 4m) and the ground clamp and electrode holder are heavy duty. The first practice project was to fabricate a lift for cleaning under the ride-on mower and the welder produced good welds once I worked out the best amperage for the tubing size. I'm very happy with the machine so far and have got several projects ahead.

I bought this cleaner in November 2019 for $2,590. I’ve spent way over $2,340 on repairs. It’s a good cleaner but the app that controls it is really… Read more

bad. I’ve deleted and reinstalled it regularly hoping that the newer version will be better but no luck. These are the problems.

1. When the app eventually loads, it often can’t make contact with the robot cleaner despite that I’m standing next to the power pack. 2. Overcoming the above problem by repeated random button pushing, the Home Screen when it eventually displays is all but blank. Going to the ‘change cleaning mode’ screen and returning to the Home Screen seems to fix this problem (I think). 3. Changing the cleaning mode does not always make the cleaner obey the new mode. This morning I put in ‘floor only’ mode only to see it cleaning at the waterline a few minutes later. 4. The manual drive inputs take so long to reach the robot that I find this feature practically useless. 5. The other features supposedly offered by the app (shop?) I never use.

I don’t need to be able to operate my pool cleaner from anywhere in the world, just when I’m next to the pool. It would be wonderful if Maytronics ditched the silly internet app and came up with a reliable hard-wired control system. I’d definitely buy a new cleaner if it had this feature.